中文字幕一本到无线

  1. <tr id="uajxh"></tr>
    <th id="uajxh"><sup id="uajxh"></sup></th>
  2. <object id="uajxh"></object>

      <center id="uajxh"></center>
    1. <th id="uajxh"><video id="uajxh"></video></th>

      Products

      Products

      AG Mill&SAG Mill

      AG Mill,SAG Mill

      CITICIC can produce below 12m autogenous mills and semiautogenous mills. autogenous / semiautogenous mills are utilized to grind run-of-mine rock or primary crusher discharge.especially medium hard and below valuable minerals and rocks with uniformly embedded coarse grains.

      AG Mills&SAG Mill

       AG Mills&SAG Mills:φ2.4x1.2~φ13x4.0m,Effective volume 5.6~216m3;

      Since the early 1990s CITICIC has been designing and manufacturing both semi-autogenous (SAG) and autogenous (AG) grinding mills under the CITIC brand.CITIC HMC manufacture a full range of Grinding Mills for the Mining Sector. Our largest mills has been delivered to SINO Site to date are Ø12.2m x 11m  28MW Gearless Drive AG Mills and Ø7.9m x 13.6m 2x8 MW Twin Pinion Drive Ball Mills. These mills are scheduled of start up on 2012.
      Our market share in China exceeds 80% with the largest mills supplied to date being a Ø7.9m x 13.6m 2x8.5MW Ball Mill  and a Ø11m x 5.4m 2x8.5MW SAG Mill , being the largest in China.

      CITICIC SAG/AG mills range in size below 12m diameter . They feature hydrostatic lubrication and can accommodate either a geared or gearless drive arrangement and are typically grate discharge and use metal liners.

      Semi-Autogenous (SAG) Mills

      Description of Autogenous Mill(AG Mill):
      This autogenous mill is typically designed to grind ores and other particulate matter in various fields like building material field, chemical industry, metallurgy industry, refractory material sector, and so on. Besides, it can also be used to grind materials with little iron content.

      As its name suggests, it fan finish impacting and grinding materials totally by itself. So it is quite easy to operate. Moreover, it is easy and convenient to maintain, and is highly efficient.

      Semi-autogenous grinding uses a minimal ball charge in the range of 6-15%, and is primarily been used in the gold, copper and platinum industries but also in the lead, zinc, silver, and nickel industries.

      Autogenous (AG) Mills

      Autogenous grinding involves no grinding media as the ore itself is the grinding media.

      AG & SAG Mills
      2006 - Ø8.0m x 2.8m AG mill.
      2007 - Ø12.2m x 11m AG Mills (6 off in production)
      2008 - Ø8.8m x 4.8m AG mill
      2008 - Ø4.5m x 8.4m Scrubber
      2008 - Ø10.37m x 5.19m SAG Mill (1 off in production) 
      2008 - Ø8.8m x 4.8 m SAG Mill (project on hold) 
      2008 - Ø9.15m x 5.5m SAG Mill (1 off in production)
      2008 - Ø7.5m x 2.8m SAG Mill (7 off in production) 
      2008 - Ø7m x 4.1m SAG Mill (1 off in production) 
      2008 - Ø6.1m x 6.4m SAG Mill (1 off in production)

      Autogenous mills(AG Mill)/ semiautogenous mills(SAG Mill)

      The CITIC autogenous / semiautogenous mills are utilized to grind run-of-mine rock or primary crusher discharge.

      The feed size to this mill is limited to the maximum size that can be practically conveyed and introduced into the mill.
      The mill product is either finished size ready for processing or an immediate size ready for final grinding in a ball mill, pebble mill, or a VERTIMILLTM.
      Wet grinding is accomplished in a slurry of 50 to 80 percent solids. AG/SAG mills can accomplish the same size reduction work as two or three stages of crushing and screening, a rod mill, and some or all of the work of a ball mill. Because of the range of mill sizes available, AG/SAG milling can often be accomplished
      Grinding Circuit Design

      AG/SAG milling can be accomplished with a variety of flowsheets. The optimum flowsheet should be established during the testing of the ore.
      Common
      flowsheets include:

      • AG-Single Stage
      • AG in a closed circuit with a crusher
      • AG with a crusher + ball mill
      • SAG-Single Stage
      • SAG with ball/VERTIMILLTM

      CITIC's process engineers welcome the opportunity to assist you with circuit and circuit control design as well as start-up, operation, and optimization
      of the milling plant.

      Feature
      The cylindrical mill adopts the driving type edge-driving, center-driving, edge-driving with multi-point meshing, etc; driven by asynchronous motor +reducer +pinion and gear as well as synchronous motor +

      air l\clutch + pinion and gear.
      Generally supported by static-dynamic pressure bearing on both ends. Fuuly closed self-aligning 120º osculation rocker bearing is used. Also single or double slipper staic- dynamic bearings can be used. The bush is made by NC machine.
      The large open gear is designed using AGMA standard, Equipped with reliably sealed gear housing and grease ahtomatic spraying lubrication system.
       The shell is key part of a mill. Carry out finite element analysis on it with computer to ensure the reliable operation;
      The shell is automatically welded, ultrasonic inspected, wholly annealed and machined by large special machine tools on one chucking; there special seal on static-dynamic connection parts , ch as feed and discharge hoper, trunnion, etc, to prevent oil and slurry leakage;
      The liner is of wear-resistance material mad by our company, wich has been specially heat-treated, with high hardness and long service life. Also other wear-resistance casting or rubber liner can be used;
      There are slow speed drive for medium and large mill;
      The high and low pressure lubricating station is equipped for medium and large mill;
      The control and protection system is controlled by PLC.
      Description of Semi Autogenous Mill(SAG Mill):
      This semi-autogenous mill, also called semi-autogenous grinding mill or SAG mill, is mainly used to grind ores and other particulate matter in different fields, like chemical industry, mining field, metallurgy industry, building material sector, and so on.

      It is an autogenous mill in nature, but it employs grinding balls to assist in its grinding just like in a ball mill. And it is mainly used in the first stage of grinding. When compared with a ball mill, it is characterized by its larger diameter and shorter length. The inside of it is lined with lifting plates to lift the materials inside up and around the inside of the mill, where it then falls off the plates into the rest of the ores. And it is widely used to process gold, copper, lead, zinc, alumina, nickel, platinum, etc.

      AG (Autogenous) / SAG (Semi-autogenous) Grinding Mills

      Autogenous (AG) and Semi-Autogenous (SAG) grinding mills have seen increased application in large mineral processing operations in recent years. They are rotating/tumbling mills in which comminution (size reduction) takes place without grinding aids. Consisting of a large diameter cylinder relative to their length (typically 2 or 2.5 to 1) these mills use large lumps of ore as the grinding media. Autogenous mills use ore exclusively as their grinding media but if hardness and abrasiveness of the ore does not lend itself well to full AG milling then a small charge of steel balls (6 to 15%) is added to assist in size reduction. This is known as a Semi-Autogenous (SAG) mill. AG/SAG mills bring about size reduction by a combination of impact, attrition and abrasion forces. Ore is swept up one side of the mill and at a certain point it falls back to impact the toe of the charge (bottom of mill). Ore particles in the body of the charge slide when moving to different heights and are subjected to attrition and abrasion forces. The inside liner of AG/SAG mills consists of steel or rubber liners and are fitted with lifter bars.

      AG/SAG mills can accomplish the same size reduction work that normally takes multiple stages of crushing, screening and grinding methods which accounts for its popularity. Often the product can be finished size or ready for final grinding in a ball mill or pebble mill. They can grind run-of-mine rock or primary crusher products with their feed size limited to what can practically be conveyed. In addition they can be less costly to operate with the reduction or elimation of expensive balls or rods.

      Parameters of Semi Autogenous Mill(SAG Mill):

      Cylinder diameter (mm) Cylinder length (mm) Effective volume of cylinder (m3) Max. ball loading capacity (t) Rotate speed (r/min) Power of main motor (kw)
      4000 1600-3600 19-42 13-29 16.2 310-710
      4500 1800-4100 27-61 19-43 15.3 470-110
      5000 2000-4500 38-83 27-58 14.5 700-1500
      5500 2200-5000 51-112 36-78 13.8 960-2200
      6100 2400-5500 69-152 48-106 13.1 1400-3100
      6700 2700-6000 93-201 65-140 12.5 2000-4300
      7300 2900-6600 120-264 84-184 12 2600-5900
      8000 3200-7200 160-347 112-242 11.4 3600-8100
      8600 3400-7700 197-429 137-299 11 4600-10000
      9200 3700-8300 246-530 172-370 10.7 5900-13000
      9800 3900-8800 296-640 206-446 10.3 7300-16000
      10400 4200-9400 359-770 250-537 10 9100-20000
      11000 4400-9900 422-909 294-634 9.8 11000-25000
      11600 4600-10400 492-1064 343-742 9.5 13000-30000
      12200 4900-11000 580-1246 405-869 9.2 16000-36000
       

      Note: Parameters in the form is only for reference, and specific ones should be referred to the signed contract technology requirements.

      Parameters of Autogenous Mill(AG Mill):

      Cylinder diameter (mm) Cylinder length (mm) Effective area of cylinder (m3) Rotating speed at work (r/min) Power of main motor (kw)
      4000 1600-3600 19-42 16.2 240-540
      4500 1800-4100 27-61 15.3 360-830
      5000 2000-4500 38-83 14.5 530-1200
      5500 2200-5000 51-112 13.8 740-1700
      6100 2400-5500 69-152 13.1 1050-2400
      6700 2700-6000 93-201 12.5 1500-3300
      7300 2900-6600 120-264 12 2000-4500
      8000 3200-7200 160-347 11.4 2800-6200
      8600 3400-7700 197-429 11 3500-7900
      9200 3700-8300 246-530 10.7 4500-10000
      9800 3900-8800 296-640 10.3 5600-12500
      10400 4200-9400 359-770 10 7000-15400
      11000 4400-9900 422-909 9.8 8400-19000
      11600 4600-10400 492-1064 9.5 10000-22000
      12200 4900-11000 580-1246 9.2 12000-27000

      Note: Parameters in the form is only for reference, and actual parameters should refer to the singed contract technology.

      As a professional manufacturer and supplier of autogenous mill in China, CITIC HMC Co., Ltd can also provide you with various other machines, such as semi-autogenous mill, overflow mill, cement production line, cement grinding plant, industrial kiln and furnace, grinding equipment, crushing equipment, environmental protection equipment, cooling equipment, drying equipment, compound fertilizer equipment, packing machine, chemical equipment and electrical control system. Most of our products have passed the certification of ISO9000 and CE, and they have been quite popular among customers from as many as 60 countries and districts such as Germany, Russia, Brazil, Egypt, Iran, Japan, South Korea, Bengal, Pakistan, Turkey, Burma, Vietnam, South Africa, Columbia, Bolivia, etc. If you need autogenous mil, please don't hesitate to contact us.

      Established in 1958, CITIC HMC Co., Ltd is a professional manufacturer of semi-autogenous mill in China. Besides semi-autogenous mill, we also provide customers worldwide with overflow mill, quartz sand ball mill, cement production line, cement grinding plant, industrial kiln and furnace, grinding equipment, crushing equipment, environmental protection equipment, cooling equipment, drying equipment, compound fertilizer equipment, packing machine, chemical equipment and electrical control system. With the certification of ISO9000 and CE, our products have been well received by customers from as many as 60 countries and districts such as Germany, Russia, Brazil, Egypt, Iran, Japan, South Korea, Bengal, Pakistan, Turkey, Burma, Vietnam, South Africa, Columbia, Bolivia, etc. If you're interested in our semi-autogenous mill, please contact us freely.

      Previous:Cement Ball Mill
      Next:Rod Mill
      中文字幕一本到无线
      1. <tr id="uajxh"></tr>
        <th id="uajxh"><sup id="uajxh"></sup></th>
      2. <object id="uajxh"></object>

          <center id="uajxh"></center>
        1. <th id="uajxh"><video id="uajxh"></video></th>