中文字幕一本到无线

  1. <tr id="uajxh"></tr>
    <th id="uajxh"><sup id="uajxh"></sup></th>
  2. <object id="uajxh"></object>

      <center id="uajxh"></center>
    1. <th id="uajxh"><video id="uajxh"></video></th>

      Products

      Products

      Kiln Support Roller

      Kiln Support Roller,rotary Kiln Support Roller,rotary Kiln Roller
      Kiln Support Roller
      Kiln Support Roller,rotary Kiln Support Roller,rotary Kiln Roller
       Kiln Support Roller,rotary Kiln Support Roller,rotary Kiln Roller
      We bring forth to our customers Kiln Support Roller for a Rotary Kiln that are designed by our experienced processionals, who hold vast knowledge in this domain. Our professionals uses refractory material that are lined to protect the steel shell and reduce radiation losses.
      Kiln Support Roller Assembly
      Kiln Support Roller,rotary Kiln Support Roller,rotary Kiln Roller
      We are manufacturer and reputed suppliers for the Kiln Support Rollers Assembly for various plants as mentioned below:
      • Sponge iron plants
      • 50tpd, 100tpd, 200tpd, 300tpd, 350tpd, 500tpd plants for various design consultants in markets, like:
      • od1700mm x id550 x 880mm
      • od1800mm x id500 x 1000mm
      • od1000mm x id320/300 x 560/550mm
      • od400mm x id160 x 240mm or any customized design.
      • Cements plants for any capacities
      • Alumina plants
      • Phoshphate mines
      • Kaolin & bentonite plants
      • Weight: from 3 tons to 200 tons per piece
       
      The supporting roller is the necessary part of the rotary kiln. 
      We are professional in manufacturing the fittings for large mining machinery. Our supporting tyre and roller is mainly used on large rotary kiln. 
      Our casting steel piece is mostly lighter than 200 tons. After the ultrasonic flaw detection, our product reaches the second level of the GB standard.
       
       Material:Carbon steel,low alloy steel:ZG20SiMn,ZG50Mn,ZG35SiMn,ZG35CrMo,ZG35SiMnMo,
       ZG42CrMo,ZG40Cr,ZG34CrNiMo,ZG40Mn and so on.
       
      Process:Place a pattern in sand to create a mold; 
      Incorporate a gating system; 
      Remove the pattern;Fill the mold cavity with molten metal;
      Allow the metal to cool;
      Break away the sand mold and remove the casting.
      Heat treatment.
      Chemical composition test,UT/MT test,mechanical property test and so on.
      Surface treatment and other requirement from customer.
       
      Standard&certificate:ASTM,BS,NF,DIN,JIS and so on;
       ISO 9001:2000;BV,CCS,DNV,NK,RINA,KR and so on.
       
      Weight:from 3 tons to 200 tons per piece
       
      Application: 
      The products can be widely used in the area of cement mill,rotary kiln,shipbuilding,
      metallurgy,mine,sugar mill,powder plant,rail road,engine bed and so on.
       
      We can provide OEM service for cement mill and rotary kiln casting parts,marine steel casting parts,sugar mill machinery parts with carbon steel or low alloy steel.
      The casting parts can be supplied as following treatment:
      Heat Treatment: Normalized, normalized and tempered,quench and tempered
      Machining: Rough machined,semi-finished machined,finished machined
       
      Quality warranty and testing equipment:
      Magnetic powder inspection
      UT nondestructive test
      Dye inspection
      Leeb hardness testing equipment
      Mechanical property test equipment
      Metallographic microscope
      Direct-reading spectrometer
       
      Features of our products:
      Durable
      Excellent tensile strength
      Accurate level of tolerance
      Good dimensional accuracy
      Superb surface finishing
      Easy to use and install
       
      Possible defects:
      Defect
      Causes
      Unfilled sections
      Insufficient material
      Low pouring temperature
      Porosity
      Melt temperature is too high
      Non-uniform cooling rate
      Sand has low permeability
      Hot tearing
      Non-uniform cooling rate
      Surface projections
      Erosion of sand mold interior
      A crack in the sand mold
      Mold halves shift
      There are no these problems for us.
      Uniform wall thickness will ensure uniform cooling and reduce defects. 
      A thick section, often referred to as a hot spot, causes uneven cooling and can result in shrinkage, porosity, or cracking.
       
      Corners
      Round corners to reduce stress concentrations and fracture
      Inner radius should be at least the thickness of the walls
       
      Machining allowance
      Add 0.0625 - 0.25 in. (0.16 - 0.64 mm) to part dimensions to allow for machining to obtain a smooth surface.

       

      Previous:Hollow Shaft
      中文字幕一本到无线
      1. <tr id="uajxh"></tr>
        <th id="uajxh"><sup id="uajxh"></sup></th>
      2. <object id="uajxh"></object>

          <center id="uajxh"></center>
        1. <th id="uajxh"><video id="uajxh"></video></th>